Monitor Audio Gold 5G w12 DEMO

Monitor Audio Gold 5G w12 DEMO

Monitor Audio Gold 5G w12 DEMO
$3,999.00
$2,899.00

Key Features

  • Three driver subwoofer system featuring two 200 mm ABR’s (Auxiliary Bass Radiators)
  • Punchy bass below 20 Hz
  • Ultra-long throw 12" driver featuring:– Dished C-CAM cone
    – Black pole and motor plates for effective heat radiation
    – Larger 75 mm diameter voice coil – black anodised to radiate more heat away
    – Triple suspension for ultimate linearity – ensuring control at high power and excursions
  • Powerful 600 Watt Hypex Class-D Amplifier module, with switching power supply – provides instantaneous deliveryof high current when required
  • DSP processing with all control features and crossover performed digitally
  • APC (Automatic Position Correction) – in-house developed automatic room set-up feature using microphone for simple system optimization
  • Top mounted control panel
  • USB for connection to ‘SubConnect’ application, firmware updates and service
SYSTEM FORMAT

Long-throw 12" driver featuring ‘dished’ C-CAM cone. Dual 200 mm ABR (auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment

LOWER FREQUENCY LIMIT

-3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default): -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz

UPPER FREQUENCY LIMIT

-3 dB @ 150 Hz

DRIVE UNIT COMPLEMENT

1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil

LINEAR DRIVER EXCURSION

19 mm Peak to Peak,
Total displacement 1.6 Litres

AMPLIFIER OUTPUT

600 W

AMPLIFIER CLASSIFICATION

Class D with high current Switch mode power supply (SMPSU)

DSP

50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU

DIGITAL CONVERSION

24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core

LED UI CONTROL PANEL

Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select

GLOBAL SETTINGS (VIA SUBCONNECT)

Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)

USER PRESETS (VIA SUBCONNECT)

4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)

USER EQUALISATION (VIA SUBCONNECT)

6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact

ROOM CORRECTION EQ

6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)

NIGHT MODE

Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections

PHASE CONTROL

0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees

LOW PASS FILTER ALIGNMENT

2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz

AUTO SENSING INPUT REQUIREMENTS

Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes

DIGITAL VOLUME LEVEL

-11 to +11 dB in 1 dB increments, via the control panel. -80 to +20 in 1 dB increments, via SubConnect application

IR REMOTE CONTROL CODE

Supplied IR remote. Front facing IR receiver with red LED indication

SUBCONNECT (PC APPLICATION)

Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup

AUDIO INPUT/OUTPUTS

LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)

CONNECTION

12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update

ELECTRICAL CERTIFICATIONS

CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)

MAINS INPUT VOLTAGE

100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)

POWER CONSUMPTION

Maximum 600 W, Standby <0.5 W (ErP compliance)

FUSE TYPE

20 mm T8AL 250 VAC

WEIGHT (UNPACKED)

26.98 kg (59 lb 8.3 oz)

EXTERNAL DIMENSIONS (INCLUDING AMP, DRIVERS AND TERMINALS (H X W X D))

413 x 410 x 433.5 mm (161/4 x 161/8 x 171/16")

EXTERNAL DIMENSIONS (INCLUDING AMP, DRIVERS, TERMINALS AND FEET (H X W X D))

445 x 410 x 433.5 mm (171/2 x 161/8 x 171/16")

SOLD AS

Single Unit

Elevate Your Audio-Visual Experience!

Ready to turn up the volume on your audio-visual dreams? Drop us a line below, and let's craft a symphony of sights and sounds that's uniquely yours. Your entertainment oasis awaits—let's make it extraordinary!

Get in Touch

Social media